Description

1989 - 1991 L98 Corvette injector parts replacement kit that contains eight (8), new Fuel Injector Retainer Clips, eight (8) new Inlet Screens and sixteen (16) new O-rings. Total of 32 pieces. This kit will service eight fuel injectors. These parts fit Rochester Products "Multec" injectors. (It will also fit 1987-1988 Rochester early style injectors with metal pintle caps.) Check my other items for kits that fit 1985-1986 and 1987-1988 Bosch and Lucas style injectors for Corvettes. NOTE: The injectors pictured are for illustrative purposes only and are NOT included. Note: The o-rings must be lubricated with Silicone grease, light oil or petroleum jelly during installation. Failure to do so may result in damage to the o-rings. Retainer clip installation: Proper installation of the retainer clips requires the receiver grooves in the injectors and the fuel rail to be clean. The clips must be carefully and correctly aligned with the receiver grooves in the fuel rail as they are installed and rotated. If they are not aligned, the clips can be damaged as they are rotated into the locked position by hand. Special tools are not needed to accomplish this. (Hammers are forbidden.) Rocking the injectors slightly from side to side as the clips are rotated may help with locking them in position. By purchasing this kit, the buyer acknowledges they have the skills to accomplish the installation of the parts correctly and will not hold the seller responsible or liable for any damages to the clips, the injectors or the fuel rail. Terms & Conditions : Free USPS Ground Advantage shipping is based off of addresses located within the United States. This includes Puerto Rico, Alaska and Hawaii. International shipping is handled through eBay's Global Shipping Program. Please be sure this part is correct for your vehicle before purchasing. We provide the part number and a picture of the actual part. We do our best to list the applications the part will fit however we cannot be sure it is correct for your particular application. That is Your responsibility. All returns not due to a listing error on our part may be subject to a 20% handling fee. Returned items must be in original packaging and uninstalled condition. Installation of these parts by a Licensed Professional Mechanic is recommended. These parts and/or the injectors and/or the engine may be damaged if the parts are not installed correctly. If you don't have the knowledge and/or ability to correctly install the parts, take the injectors to someone that does. In no event will the seller be liable for any damages, direct or indirect, consequential or compensatory, including, without limitations, lost profits, for any representations, breaches or defaults arising out of the use of this part. By purchasing these parts, the buyer acknowledges they have the knowledge and ability to safely and correctly install these parts, and will not hold the seller liable for any damages or injury resulting from the installation of these parts.